MB21 The ULTIMATE Color Enhancing Sealer - Quart size - 100% solids color enhancing sealer has more resins and provides a darker color.
SHAKE WELL BEFORE USING
SURFACE PREP: Surface must be clean, dry and free of any sealer, wax or coating.
THINNING: Is not normally required. MB-21 ULTIMATE
can be thinned with Mineral Spirits (where permitted by local
regulations) up to 50% to extend coverage and/or reduce color
enhancement and gloss. Mix thoroughly before use. Store only in clearly
Always test a spare piece of material in an inconspicuous area to
determine dwell time and coverage rate for desired results. Too much
gloss can be remedied but color shift is not reversible. Spraying is not
recommended. Apply liberally to surface to be treated with a paint
roller, pad or brush. Keep surface wet with sealer solution until
saturated, 5 – 30 minutes depending on substrate. For a low sheen
finish, remove excess sealer before it dries on the surface using a
clean dry cloth. Dried sealer can usually be removed from surface using
an alkaline cleaner or stripper.
COVERAGE RATES: Depending upon the porosity of the surface being sealed and the desired level of gloss, 75 - 500 sq. ft. per quart.
CLEAN UP: Clean hands with warm soapy water. Tools can be cleaned with Mineral Spirits.
DRY TIME: Light foot traffic when dry to touch, usually 4-8 hours, depending on substrate, temperature and application methods.
Will not protect surface from abrasion or chemical etching. Heavy
applications may reduce slip resistance of substrate. May damage or be
difficult to remove from non-recommended surfaces such as glass or
WARNING! CONTAINS PETROLEUM DISTILLATES. VAPOR HARMFUL. HARMFUL OR FATAL IF SWALLOWED. CAUSES IRRITATION. Keep
out of reach of children. Keep container closed. Use with adequate
ventilation. Avoid prolonged skin contact. Wash hands thoroughly after
handling. Do not store near heat or flames. FIRST AID:
In case of eye contact, flush with plenty of water for at least 15
minutes. Call a physician. If swallowed, do NOT induce vomiting. If
vomiting occurs, keep head below hips to prevent aspiration of liquid
into lungs. If inhaled, remove exposed person to fresh air. Treat
symptomatically. Call a physician.
Polyorganosiloxane Proprietary, Petroleum Distillates Hydrotreated
Light (C.A.S.#64742-47-8), Polydimethylsiloxane (C.A.S.#63148-62-9).
Made in the USA